In the daily operations of scientific research and laboratories, the packaging of reagents plays a basic and core role. Scientific researchers often need to face liquids with different properties and varying volumes. How to efficiently and accurately complete the packaging of these liquids has become a challenge that they must overcome. Opentrons Flex reagent dispensing workstation provides scientific researchers with solutions to these challenges with its flexible configuration, intelligent operation interface, and excellent dispensing accuracy. However, how does this workstation achieve an efficient and accurate dispensing process? This will be introduced in detail below.
Opentrons Flex Reagent Dispensing Workstation
1. Setup steps 1. Select the appropriate pipette configuration. Opentrons Flex workstation supports a variety of pipette configurations, including two Flex 8-channel pipettes or a single Flex 96-channel pipette. Select the appropriate pipette configuration based on the amount and type of liquid to be dispensed. 2. Configure liquid information. In the Opentrons application or online protocol editor, enter the relevant information of the liquid to be dispensed, including liquid name, volume, concentration, etc. This information will help the workstation automatically calculate dispensing parameters. 3. Set the dispensing parameters. Set the dispensing parameters according to the characteristics of the liquid and the dispensing requirements, such as dispensing speed, dispensing volume, pipette offset calibration, etc. These parameters can be adjusted via the Opentrons application or the workstation's control panel. 4. Install and calibrate the pipette. Install and calibrate the pipette according to Opentrons' calibration guide. The calibration process includes steps such as probe installation, tip length calibration, and pipette offset calibration to ensure the accuracy and stability of the pipette. 5. Prepare the dispensing container. Select the appropriate dispensing container according to the dispensing requirements, such as centrifuge tubes, PCR plates, etc. Make sure the container is compatible with the pipette and placed in the appropriate location on the workstation. 6. Start the distribution program. In the Opentrons application, select the configured distribution protocol and start the distribution program. The workstation will automatically perform liquid dispensing operations.
2. Notes 1. Liquid compatibility Before dispensing, check whether the liquid to be dispensed is compatible with the materials and components of the Opentrons Flex workstation. Certain liquids can cause corrosion or damage to the workstation. 2. Cleaning and disinfection Before dispensing different liquids, ensure that the Opentrons Flex workstation is thoroughly cleaned and disinfected to avoid cross-contamination. Use appropriate cleaners and disinfectants and follow Opentrons cleaning guidelines. 3. Safe operation During the operation, comply with relevant safety regulations and operation manuals to ensure the safety of personnel and equipment. Wear appropriate protective equipment such as gloves, goggles, etc. 4. Maintenance and maintenance Perform regular maintenance and upkeep on the Opentrons Flex workstation, including cleaning parts, checking calibration status, etc. This helps ensure long-term stable operation and accuracy of your workstation. 5. Monitor and record the operating status of the workstation and the results of the disassembly during the disassembly process. Record any abnormalities or errors and make adjustments and corrections in a timely manner.
Opentrons Flex reagent dispensing workstation has demonstrated its unparalleled advantages when handling the dispensing tasks of different liquids. Through flexible configuration options, intelligent operation interface and precise dispensing control, this workstation can easily handle various liquid dispensing needs from micro to large amounts, from low viscosity to high viscosity. Whether it is simple single-liquid dispensing or complex mixing and dispensing of multiple liquids, Opentrons Flex can provide stable and reliable dispensing results, saving valuable time and energy for scientific researchers.
Related reading recommendations
Pipette White Paper: 4-in-1 Centrifuge Tube Rack
White Paper: Opentrons High-Precision Pipettes
Handling robot instrument service overview
The difference between OT-2 NGS Workstation and Flex NGS library preparation workstation
How to calibrate the Opentrons Flex nucleic acid extraction workstation
The experienced service team and strong production support team provide customers with worry-free order services.
